SQ-612-SS 380-760 NM 0-2.5 V输出EPAR传感器

$ 460.00

克雷亚远地点的最新尖端ePAR传感器ted in 2021 as an upgrade to our ePFD sensor and designed to measure the newly defined 380-760 nm ePAR radiation range that research has shown to be photosynthetically active, beyond the traditional 400-700 nm range. The SQ-612 ePAR is an amplified sensor with a 0-2.5 V output. The sensor features a rugged, aluminum housing that is fully-submersible and built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of ePAR sensors include measuring total ePAR intensity over plant canopies in all growing environments, monitoring and adjusting grow lights, and researching plant morphogenic activity and photobiology. Many next generation LED fixtures, the sun, and other light sources emit these newly confirmed UV and Far-red photosynthetic wavelengths, but they have not been measurable by traditional 400-700 nm PAR meters until now.

该传感器(SQ-610)的模拟版本配有距离传感器头30厘米的内联电缆连接器,以便标准用作长型电缆尾纤传感器,或与我们一起使用bob 体育网址 通过拧下连接器,丢弃电缆的长段,然后将传感器拧到密度胶痛上的配合连接器上。

有关更多产品信息,请查看这些链接

有关Apogee Epar传感器的更多信息>>点击这里

SQ-612如何与以前的Apogee量子传感器不同?

SQ-612是一个扩展的光合作用辐射(EPAR)0至2.5 V传感器,光谱范围为380至760nm±5nm,可以在下图中看到。
SQ-610光谱响应
使用的SQ-612在哪里?

SQ-612用于测量最新的LED生长灯,具有传统的400-700nm PAR范围之外的波长。研究表明,添加紫外线和远红色LED对固定装置的价值,以实现各种疾病控制和光学发生效果。SQ-612的扩展范围滤波器允许其测量来自UV和远红色的光子。
详细描述
去哪买

克雷亚远地点的最新尖端ePAR传感器ted in 2021 as an upgrade to our ePFD sensor and designed to measure the newly defined 380-760 nm ePAR radiation range that research has shown to be photosynthetically active, beyond the traditional 400-700 nm range. The SQ-612 ePAR is an amplified sensor with a 0-2.5 V output. The sensor features a rugged, aluminum housing that is fully-submersible and built to withstand harsh conditions, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. The sensor cable includes an IP68 marine-grade stainless-steel cable connector to simplify sensor removal and replacement from permanent installations for maintenance and calibration. Typical applications of ePAR sensors include measuring total ePAR intensity over plant canopies in all growing environments, monitoring and adjusting grow lights, and researching plant morphogenic activity and photobiology. Many next generation LED fixtures, the sun, and other light sources emit these newly confirmed UV and Far-red photosynthetic wavelengths, but they have not been measurable by traditional 400-700 nm PAR meters until now.

该传感器(SQ-610)的模拟版本配有距离传感器头30厘米的内联电缆连接器,以便标准用作长型电缆尾纤传感器,或与我们一起使用bob 体育网址 通过拧下连接器,丢弃电缆的长段,然后将传感器拧到密度胶痛上的配合连接器上。

有关更多产品信息,请查看这些链接

有关Apogee Epar传感器的更多信息>>点击这里

SQ-612如何与以前的Apogee量子传感器不同?

SQ-612是一个扩展的光合作用辐射(EPAR)0至2.5 V传感器,光谱范围为380至760nm±5nm,可以在下图中看到。
SQ-610光谱响应
使用的SQ-612在哪里?

SQ-612用于测量最新的LED生长灯,具有传统的400-700nm PAR范围之外的波长。研究表明,添加紫外线和远红色LED对固定装置的价值,以实现各种疾病控制和光学发生效果。SQ-612的扩展范围滤波器允许其测量来自UV和远红色的光子。
当前库存:
电源供应 5至24 V DC 当前的画 在12 v处为57μA 输出(灵敏度) 0.625 mV / mmolmˉ²Sˉ¹ 校准因子(敏感度的互易) 每MV1.6μmolmˉ²Sˉ¹ 校准不确定性 ±5% 校准输出范围 0到2.5 v 测量范围 0至4000μmolmˉ² 测量可重复性 小于0.5% Long-term Drift (Non-stability) 每年不到2% 非线性 小于1%(高达4000μmolmˉ²) 响应时间 不到1毫秒 视野 180㎡ 光谱范围 380至760nm±5nm(响应大于50%的波长) Directional (Cosine) Response ±2%在45°;75°±5%±5% 方位角错误 小于0.5% Tilt Error 小于0.5% 温度响应 -0.11±0.04%/每C 日常生活中的不确定性 Less than 5 % 住房 阳极氧化铝机身用丙烯酸漫射器 IP Rating IP68. 操作环境 -40到70 c;0至100%相对湿度;可以在水中浸入30米的深处 方面 直径30.5毫米,高度为37毫米 块状(电缆的5米) 140克 电缆 5米的两根导体,屏蔽双绞线;TPR夹克;辫子铅线;不锈钢(316),M8连接器 保修单 4年的材料和工艺缺陷