SP-610-SS Downward-Looking Thermopile Pyranometer

$333.00

The SP-610 is a downward-looking thermopile pyranometer with an analog output range of 0 to 300 mV. The sensor incorporates a blackbody thermopile detector and flat glass window with a rugged housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. Typical applications include shortwave radiation measurement in agricultural, ecological, and hydrological weather networks. Sensors are also used tob0b体育app下载

These sensors can also be coupled with our downward facing pyranometer to form an albedometer. For this application, we recommend the ApogeeSP-710-SSAlbedometer sensor package, which consists of oneSP-510-SSupward-facing pyranometer, oneSP-610-SSdownward-facing pyranometer, anAY-001differential splitter, and an AW-605-SS 5 meter cable.For mounting to a mast or directly to a solar panel, we recommend using either theAL-130Albedometer mounting bracket or theAM-500Net Radiometer mounting bracket paired with anAM-130mounting fixture with 12" rod.

Sensor includes IP68 marine-grade stainless-steel cable connector 30 cm from head to simplify sensor removal and replacement for maintenance and recalibration.

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

ProductManual

Specification Sheet

Technical Drawing

MORE INFORMATION ON APOGEE PYRANOMETERS >>click here

Full Description
Where to Buy

The SP-610 is a downward-looking thermopile pyranometer with an analog output range of 0 to 300 mV. The sensor incorporates a blackbody thermopile detector and flat glass window with a rugged housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers. Typical applications include shortwave radiation measurement in agricultural, ecological, and hydrological weather networks. Sensors are also used tob0b体育app下载

These sensors can also be coupled with our downward facing pyranometer to form an albedometer. For this application, we recommend the ApogeeSP-710-SSAlbedometer sensor package, which consists of oneSP-510-SSupward-facing pyranometer, oneSP-610-SSdownward-facing pyranometer, anAY-001differential splitter, and an AW-605-SS 5 meter cable.For mounting to a mast or directly to a solar panel, we recommend using either theAL-130Albedometer mounting bracket or theAM-500Net Radiometer mounting bracket paired with anAM-130mounting fixture with 12" rod.

Sensor includes IP68 marine-grade stainless-steel cable connector 30 cm from head to simplify sensor removal and replacement for maintenance and recalibration.

FOR MORE PRODUCT INFORMATION, CHECK OUT THESE LINKS

ProductManual

Specification Sheet

Technical Drawing

MORE INFORMATION ON APOGEE PYRANOMETERS >>click here

Current Stock:
Sensitivity (variable from sensor to sensor, typical values listed) 0.15 mV per W mˉ² Calibration Factor (reciprocal of sensitivity) (variable from sensor to sensor, typical values listed) 6.7 W mˉ² per mV Calibration Uncertainty ± 5 % Calibrated Output Range 0 to 300 mV Measurement Range 0 to 2000 W mˉ² (net shortwave irradiance) Measurement Repeatability Less than 1 % Long-term Drift Less than 2 % per year Non-linearity Less than 1 % Detector Response Time 0.5 seconds Field of View 150˚ 光谱范围(50 % points) 295 to 2685 nm Directional (Cosine) Response Less than 20 % for angles between 0 and 60 ˚ Temperature Response Less than 5 % from -15 to 45 C Zero Offset A Less than 5 W mˉ², Less than 10 W mˉ² (heated) Zero Offset B Less than 5 W mˉ² Uncertainty in Daily Total Less than 5 % Operating Environment -50 to 80 C, 0 to 100 % relative humidity Heater 780 Ω, 15.4 mA current drain and 185 mW power requirement an 12 V DC Dimensions 23.5 mm diameter, 27.5 mm height Mass 100 g Warranty 4 years against defects in materials and workmanship